Scan your Wi-Fi and pick the best channel
Use StageWave Server's scan to find the least crowded channel at your venue
The Wi-Fi scan in StageWave Server 6 measures the networks at the place where you play and tells you which channel to set on your router. Use it before the show: almost all Wi-Fi audio dropouts come from other networks using the same channel as yours.
Before you start
Do it while you set up the network, before the band arrives and with the router already in its place on stage.
The scan uses the computer's Wi-Fi radio, even if the Server runs over cable (as we recommend). If it is off, you will see «Wi-Fi is turned off». On macOS, click Turn Wi-Fi on; on Windows, Open Wi-Fi settings takes you to the switch. Turning it on only scans: it does not join any network.
How to use it
- In StageWave Server's sidebar, open Wi-Fi. If Musicians are already connected, the Server asks first because the scan can cut the audio: use Open anyway only if you are setting up the network.
- Wait for the search to finish. While nobody is connected, the scan repeats on its own every 10 seconds; you can also click Scan.
- In the list, tick the network your band will use. The 2.4 GHz and 5 GHz bands of the same router count as two networks.
- At the top you will see the verdict (Ready, Usable or Not suitable for real-time audio) and the reason for each criterion that is not green, such as channel congestion or band steering (the router feature that moves a device to another band mid-session).
- Click Recommendations. Under What to change on the router you will see the 5 GHz channel with the least competition at your venue and the other recommended settings: WPA2 or WPA3, 20 MHz width, auto-channel off, different names for 2.4 and 5 GHz, and band steering and DFS disabled. If the Server has no data yet, it suggests the usual advice: 5 GHz, channel 165 at 20 MHz.
Change those settings on your router (each brand names them differently: see Everything you need to know about Wi-Fi routers for StageWave) and click Scan again. If the verdict improved, it worked.
A scan is a snapshot of the moment: repeat it on show day, in the same place and at the same time if you can. 6 GHz networks are evaluated, but the Server does not recommend a channel in that band.
If no networks show up
On macOS, the notice «Network names are hidden» means StageWave Server does not have Location permission. Click Open Settings in the notice, turn on the Server's permission if it appears in the list, and click Scan again.
On Windows 11, the notice «Windows needs Location to read the Wi-Fi» is fixed with Open Location: turn on Location services and Let desktop apps access your location. If the notice is «No Wi-Fi found on this computer», the computer has no usable Wi-Fi adapter (or it is disabled) and there is nothing to scan; the Server works the same over Ethernet.
On show day
With the band connected, the Wi-Fi of the Server's computer must be off, because the scan uses that radio and can cut the audio. If it is on, a bar over the Channels screen reminds you and has the Turn Wi-Fi off button (on Windows, Open Wi-Fi settings). If any Musician arrives over that Wi-Fi, the bar asks you to connect the computer by cable.
What data is sent
To improve the scan, the Server sends us a summary of each visit to this view while you are signed in (in offline mode nothing is sent): how many scans you did, what you did in the view, the channel and signal measurements, and the verdicts. Of your network we only store the name (SSID) of the one you tick as your band's; we do not store the router identifier (BSSID), the names of neighboring networks, your IP or your location.
If you have questions about this data or still have dropouts, write to us through the chat on the website. Audio is very unstable can help too.