Your first mix in Musician

Why you start with the channels at 0 and how to build your mix

The first time you open StageWave Musician, all your channels are at 0 and you hear nothing until you raise your faders. It is not a fault: you start from silence and build your mix the way you like it. Before you start, get your phone ready with Get your phone ready before you play.

From the first tap to your mix

  1. Open the app and tap Connect to StageWave Server. There is no account to create and no sign-in in Musician: the account belongs to StageWave Server.
  2. Go through the Get your phone ready list and tap Continue.
  3. Type your name and tap Go to my mix.
  4. The app looks for the Server, connects and turns the audio on by itself.
  5. Plug in your headphones and raise your faders in Channels. You will see the meter move and you start hearing your mix.

If the app cannot find the Server, see The musicians app does not connect with the StageWave Server.

If you already had a mix, you do not start from scratch: the phone saves yours every minute while audio is playing, and also when you send the app to the background. To get sound without raising faders one by one, you can load a saved mix from Bank (tap Load) or copy a bandmate's from Band, with Copy mix in the β‹― menu on their card.

Your controls

At the bottom there are five tabs: Channels, Groups, Band, Bank and Settings. Above the bar, in Channels and Groups, is the Master strip, the overall volume control.

Each channel is a card with its fader and its meter. 100% is the nominal level and the maximum is 200%. M mutes the channel and S plays it alone; Clear Solo, on the Master strip, turns off all solos. Drag the knob to move the pan.

The pale bar behind the meter shows the level before the fader. This way a channel at 0 or muted still shows signal: if that bar moves, the channel does carry audio and you only need to raise the fader.

How many channels you see is decided by the Server. Locked channels do not show in your list, and a linked (stereo) pair shows as a single channel. Changing names, linking and locking belong to the band leader; see How to use Mirror Mode (Remote Mode) to assist your musicians.

Reverb and Delay

On the top bar, next to Levels, you can pick Volume, Reverb or Delay. In Volume, the faders are your mix. In Reverb or Delay, each channel's fader becomes how much of that channel you send to the effect. If the Master effect is off, the sends are not heard.

Each channel's settings

The settings button on each card opens the channel panel: Sound Enhance ✨ (turns on the noise gate, the compressor and the equalizer together), presets like Female Vocal, Bass or Kick, and the Reverb and Delay sends. If a preset uses a Master effect that is off, the panel offers Turn on; nothing turns on by itself. More in Does StageWave have effects or a compressor?.

Groups work like a channel and move all the channels they contain at once; the group is formed from each channel's details.

Save your mix

In Bank, tap +, give it a name and tap Save. To go back to it, tap Load. The Bank lives on your phone and is not available during a test session.

If you connect and hear nothing

  1. Raise the faders in Channels; the meter's pale bar tells you whether the channel carries audio.
  2. Check that the channel does not have M on and that no other channel has S on (use Clear Solo).
  3. Make sure the audio is on with the power button on the top bar and that your headphones are connected.
  4. If you see the No audio notice, the phone is not receiving audio: check that it is still on the band's Wi-Fi and that StageWave Server is running.
  5. If you see Buffer mismatch, the Server uses a different buffer size. It is not a Wi-Fi problem: the app tries to adjust on its own; if it stays, check the Buffer size in Settings β€Ί Audio settings on the Server and turn the audio on again.

If you still hear nothing, write to us in the site chat and tell us which phone you have and the notice you see. If the audio drops, see Audio is very unstable.