StageWave Point: bring all your channels into your DAW
Record or mix every input channel in your DAW, vMix or OBS
StageWave Point lets you record or mix every channel of your console separately. It receives the input audio of all channels from StageWave Server, before the mix and the faders, and presents it to the system as an audio interface. That way your DAW (the program where you record and mix), vMix or OBS can use all the channels at once: to record a rehearsal or a show in multitrack, or to mix the band for a stream.
Availability. StageWave Point is now available for macOS 10.15 or later (Apple Silicon or Intel) and Windows 10 or 11, 64-bit. On macOS, Point shows up as a Core Audio device. Download it from your account at account.stagewave.io, in the Download the apps section, on the StageWave Point card (on macOS there is a single universal download, "macOS", and for Windows the "Windows" one). The card says "Requires StageWave Server 6 or later".
- Windows: Point brings its own drivers and shows up as an ASIO driver, so only 64-bit programs with ASIO support see it. Zoom, the browser and other programs without ASIO do not see it. OBS needs the obs-asio plugin. The steps are in How to install StageWave Point on Mac and Windows.
- Listen to the DAW on Windows: if you choose an ASIO output, that interface is reserved for StageWave Point while you monitor. WASAPI shares it, with more latency.
What it receives
Point receives the audio as it comes in on each channel, with its names (for example "Kick" or "Vox 1"), not the mix each musician hears. The number of channels and the sample rate are the Server's: if you change them there, your DAW sees it as an interface change and you may need to reopen the project. The audio is 16-bit, the same as the Server's.
Connections and channels
A Point takes one connection of your license, just like a Musician (on Point's screens it is called "seat"), and frees it when it disconnects. If you have 8 connections and 2 Points connected, you have 6 left for Musicians. For the details, see What counts as a connection: Musicians and Points.
With the free connection, which is just one, Point receives only the first 2 channels and your DAW sees 2 inputs; in its window you will see «Free connection: only the first 2 channels» and the See plans link. With a plan, or during a test session, it receives all of them.
If no connection is left, Point shows «The band is full»: free one or add more, and click Retry. If the test session ends and the account has no plan, Point tells you and offers See plans.
What you need
StageWave Server 6 or later, open, signed in and with an input audio interface working. Point has no account of its own: the account, the license and the connections live in the Server. With an older Server, Point shows «Server out of date»; update it and connect again. It does not connect either if the Server is in offline mode.
Point must be on the same network as the Server. For long recordings, connect it by cable: on Wi-Fi, the flow of all the channels competes with your Musicians'. Point works on macOS 10.15 or later; for other systems, see the availability notice above and the System Requirements.
How to connect it
- Install Point with How to install StageWave Point on Mac and Windows.
- Open StageWave Server, sign in and leave your audio interface working.
- Open StageWave Point. It looks for the Server by itself and, once it finds it, changes to Connected. If it does not find it, type the IP of the Server's computer in Type the IP and click Connect.
- In your DAW, vMix or OBS, choose StageWave Point as the audio interface. You will see one input for each channel Point receives, with its name.
Point does not reconnect by itself: if the connection drops, click the power button in the top right corner.
Listen while you record
The Monitor L and Monitor R outputs are for your DAW to send audio back. Turn on Listen to the DAW, choose the output (for example, your headphones) in Choose an output and, in the DAW, send the master to Monitor L/R.
Buffer
The buffer is the audio Point keeps as a reserve against network dropouts: more buffer means fewer dropouts and more latency. By default it is on Auto: Point measures the network, picks a safe value and adjusts it by itself. If you prefer to decide, Manual lets you choose between 2× and 32× the Server's buffer. Point remembers your choice.
If something fails, StageWave Point does not appear in my DAW explains each Point notice and what to do. And if you cannot solve something, write to us through the chat on the website.