Get to know StageWave Server: a tour of the app
Account, audio, musicians, mixes bank, Wi-Fi and offline mode: what the Server does and where to find it
StageWave Server runs on the computer connected to your mixer or audio interface. It receives the audio, mixes it and sends it over your Wi-Fi to your band's Musicians and, if you want, to your DAW with StageWave Point.
This tour follows the order of the version 6 sidebar. If this is your first time, start with the Quick Start Guide: Your First Monitoring with StageWave and come back when you need to find something.
If you are coming from the previous Server, the User menu is gone: your account and Log out are in the avatar at the bottom of the sidebar.
Channels
This is the screen where you mix, and it opens first. Each channel of your interface has its own card, with fader and meter, name and icon, pan, mute and solo, effects and group. With Link channel you join two neighboring channels as a stereo pair, and with Lock channel you disable the use of that channel.
At the top is the Master. The Volume | Reverb | Delay selector changes what the faders control: each channel's volume, or how much it sends to reverb or delay.
Each channel's effects are noise gate, compressor, equalizer, reverb and delay. If you do not want to set them up by hand, Sound Enhance turns on several at once. More detail in Does StageWave have effects or a compressor?
Groups
Groups move several channels at once, for example the whole drum kit. There are 8, and a channel can only be in one. To put a channel in a group, use Add to group on its card; from there you can also change or remove it.
Bank
This is where you save your work so you do not start from scratch at every show: boards (channels with their names, icons, links and locks) and mixes (levels and effects). Import and Export take your work to another computer, and Send hands a mix to the connected Musicians.
While you are signed in, the bank is saved to the cloud on its own. Versions shows the earlier copies, with their date and the computer where they were saved. If you pick one and press Restore, it replaces the bank on this computer and in the cloud; the one you had stays in the same list, in case you want to go back. During a test session the bank is not available; see How do I test StageWave with my whole band? (test mode)
Band
Here you see who is connected, between Musicians and Points. The counter in the sidebar, for example 3/8, tells you how many of your connections you are using; it turns red when the band is full. How they are counted is explained in What counts as a connection: Musicians and Points.
To connect a musician, with the phone on the same network as the computer:
- In Band, click Pair device. You will see a QR code and the Server's IP address.
- In Musician, tap Try Scanning QR Code.
If it does not connect, click Trouble connecting? in that window or see The musicians app does not connect with the StageWave Server.
If a musician complains about dropouts, click the Performance indicator on their card: there you see the dropouts, the network, the latency and the buffer, and you can turn on the Anti-glitch (what it is and how it works). In the card's actions menu you can also edit their mix with Mirror Mode (How to use Mirror Mode), rewrite their mix or their groups with the Server's, or remove them from the session. Nobody is the leader device by default: you assign it here, with Make leader device.
Wi-Fi
Use it before the show to pick the best channel on your router. If Musicians are already connected, the Server warns you before scanning because it can cut the audio. The steps are in Scan your Wi-Fi and pick the best channel.
Offline
It lets you prepare a show without an audio interface or musicians, with a blank board or a template. The entry turns amber while it is active. More in Prepare your show without the mixer: how to use Offline Mode.
Settings
Here you choose the audio interface the Server takes the sound from. In Devices, choose the Input device and, if you want to hear the mix on the computer, turn on Monitor on this computer and choose the output. When you change a device, the audio engine restarts and the sound cuts out for a few seconds for everyone, so the Server asks you to confirm.
In Audio settings you find the sample rate, the Buffer size and the engine restart. If the audio sounds robotic or drops out, see Audio feels robotic. You change the language in Layout preferences.
Your account and quitting
The avatar opens your Account information, with your plan and your connections, and Log out. Manage plan takes you to account.stagewave.io. To use your account on another computer, see Your account on another computer: Use here, logging out and what happens without internet.
If you quit the Server with Musicians connected, it tells you how many will be disconnected. Only one Server can be open per computer.
In short
You mix in Channels, save in Bank, connect people in Band and check your network in Wi-Fi. Everything else is in Settings and in the avatar. If you cannot find something, write to us in the site chat. For the next step, see System Requirements or How do I update StageWave Server?.